بررسی شرایط فرآیند اکستروژن و ترکیب ساختاره بر ویژگی‌های اسنک ذرت و مغز پسته

نوع مقاله : مقاله کامل علمی پژوهشی

نویسندگان

1 گروه علوم و صنایع غذایی، موسسه آموزش عالی جهاد دانشگاهی کاشمر، خراسان رضوی، ایران

2 گروه پژوهشى فراوری مواد غذایی، پژوهشکده علوم و فناورى مواد غذایى، جهاد دانشگاهى خراسان رضوى، ایران

چکیده

سابقه و هدف: از اسنک‌ها به عنوان میان‌وعده‌های غذایی یاد می‌شود که در بین وعده‌های اصلی میل شده و مقدار آن کم‌تر از وعده غذایی اصلی می‌باشد. به منظور افزایش ارزش تغذیه‌ای این میان وعده پرطرفدار، می‌توان از افزودنی‌هایی نظیر لبنیات، گوشت، ماهی، سبزیجات، میوه‌ها، حبوبات، غلات مختلف و تنقلاتی مانند پسته ، گردو، بادام و بادام‌زمینی و غیره استفاده نمود. پسته سرشار از مس، منیزیم و انواع ویتامین‌های B است بنابراین به منظور افزایش ارزش تغذیه‌ای اسنک می‌توان از پسته در تهیه آن استفاده نمود.
مواد و روش‌ها: در این پژوهش از پسته با نسبت‌های متغیر 7، 14 و 21 درصد در فرمولاسیون غله حجیم‌‌شده بر پایه آرد ذرت و همچنین رطوبت 12، 15 و 18 درصد و سرعت چرخش مارپیچ 120، 150 و 180 دور بر دقیقه بود. اکسترودر با دمای ثابت به ترتیب ناحیه دوم 120 و ناحیه سوم 145 درجه سانتی‌گراد و سرعت خوراک ثابت 40 کیلوگرم بر ساعت بود. آزمون‌های انجام شده شامل ویژگی‌های فیزیکی (چگالی توده، نسبت انبساط وسختی بافت، رنگ و مشخصه‌های ریز ساختاری)، عملکردی(شاخص‌جذب آب، شاخص حل درآب، شاخص جذب روغن، عدد پراکسید) و ویژگی‌های حسی فرآورده‌‌، مورد بررسی قرار گرفته شد. این پژوهش در قالب روش سطح پاسخ ( RSM ) و طرح باکس بنکن ( Box-Behnken ) و به منظور آنالیز تغییرات از نرم افزار آماری Minitab نسخه ۱7 استفاده شد.
یافته‌ها: مهم‌ترین مساله در تهیه اسنک‌ها مزه و بافت آن می‌باشد. با افزایش پسته در نمونه‌های تولیدی اسنک، میزان سختی بافت به طور معناداری افزایش یافت (P<0/05) و میزان رضایتمندی از طعم و مزه اسنک بیشتر گردید. علاوه بر این افزایش پسته باعث کاهش میزان رنگ قرمز و آبی و متمایل شدن رنگ‌ها به سبز و زرد گردید. افزایش رطوبت به طور معنادار باعث افزایش نسبت انبساط، چگالی توده و سختی اسنک گردید (P<0/05). افزایش سرعت چرخش مارپیچ باعث کاهش میزان روشنایی و جذب آب اسنک گردید. بررسی ویژگی ریز ساختاری اسنک که بر روی نمونه بهینه انجام گرفت نشان داد که میزان پف کردگی اسنک مناسب بوده و قطر دیواره حباب‌های تشکیل شده، کم تر از 17 میکرومتر بود. دیواره حباب‌ها تقریبا صاف بوده که نشان دهنده مخلوط شدن خوب پسته با ذرت و همچنین اختلاط خوب و مناسب گویچه‌های چربی با آرد ، می‌باشد.
نتیجه‌گیری: بر طبق نتایج به‌دست آمده، شرایط بهینه فرآیند اعم از سرعت چرخش مارپیچ، مغز پسته و رطوبت خوراک به ترتیب برابر 150 دور بر دقیقه، ۱۴ درصد و 15 درصد بود. بنابراین می‌توان در صنعت تهیه اسنک، از پسته با درصدهای ذکر شده نیز استفاده نمود.

کلیدواژه‌ها


عنوان مقاله [English]

Effect of extrusion conditions and formulation on characteristics of snack corn and pistachio

نویسندگان [English]

  • Nooshin Noorafshan 1
  • Shahram Beiraghi-Toosi 2
  • Qulamali Goli-Movahhed 2
1 Department of Food Science and Technology, ACECR Kashmar Higher Education Institue, Kashmar, Iran
2 Food Processing Department, Food Science and Technology Research Institute, ACECR, Mashhad, Iran
چکیده [English]

Background and objectives :Snacks are referred to as food that are eaten between main meals and the amount is less than the main meal. In order to increase the nutritional value of this popular snack, additives such as dairy products, meat, fish, vegetables, fruits, legumes, various cereals and snacks such as pistachios, walnuts, almonds and peanuts, etc. can be used. Pistachios are rich in copper, magnesium and a variety of B vitamins, so in order to increase the nutritional value of snacks, pistachios can be used in its preparation.
Materials and methods: In this study, pistachios with variable ratios of 7, 14 and 21% in bulk grain formulations based on corn flour as well as moisture of 12, 15 and 18% and spiral rotation speed were 120, 150 and 180 rpm. The constant temperature extruder was 120 ° C in the second region and 145 ° C in the third region, and the constant feed rate was 40 kg / h. Tests performed were included physical characteristics (mass density, expansion ratio and tissue hardness), functional properties (water absorption index, water solubility index, oil absorption index, peroxide number), colorimetric and sensory components as well as characteristics The microstructures of the extruded product were examined. This study was conducted in the form of response level method (RSM) and Box-Behnken design and to analyze the changes, Minitab statistical software version 17 was used.
Results: As it turns out, the most important issue in preparing snacks is its taste and texture. With the increase of pistachios in snack production samples, the amount of tissue hardness increased, while the satisfaction with the taste of snacks increased. In addition, increasing pistachios reduced a * and b * and the colors tended to be green and yellow. Increasing the humidity increased the expansion ratio, mass density, hardness and water absorption of the snack. Increasing the rotation speed of the spiral reduced the brightness and water absorption of the snack. Examination of the microstructural properties of the snack performed on the optimal sample showed that the amount of puffiness of the snack was appropriate and the wall diameter of the bubbles formed was less than 17 micrometers. The walls of the bubbles are almost smooth, which indicates that the pistachios are well mixed with the corn, as well as the good mixing of fat globules with flour.
Conclusion: According to the results, the optimal process conditions including screw speed, pistachio kernel and feed moisture were 150 rpm, 14% and 15%, respectively.

کلیدواژه‌ها [English]

  • Snack
  • Extrusion
  • Pistachio
  • Screw speed
  1. AL-Saghir, M.G., and Porter, D.M. 2012. Taxonomic revision of the genus Pistacia L. (Anacardiaceae). American J. of Plant Sciences, 3: 12-32
  2. Altan, A., McCarthy, K.L., and Maskan, M. 2008. Evaluation of snack foods from barley–tomato pomace blends by extrusion processing. J. of Food Engineering, 84: 2. 231–242.
  3. Anderson, R.A., Conway, H.F., Pfeifer, V.F., and Griffin, E.L.J. 1996. Gelatinization of corn grits dry roll-and extrudates-cooking. Cereal Science Today, 14. 4e12.
  4. Arshad, M.U., Anjum, F.M., and Zahoor, T. 2010. Nutritional assessment of cookies supplemented with defatted wheat germ. Food Chemistry, 102: 123-128. (In Persian)
  5. Badrie, N., & Mellowes, W.A. 1991 Effect of extrusion variables on cassava extrudates. J. of Food Science, 56: 5. 1334-1337.
  6. Bawa, A.S. and Sishu, J.S.2003. Snack foods Range on the market, In: Benjamin Caballero, Editor (s) – in - Chief. Encyclopedia of Food Sciences and Nutrition. Encyclopedia of Food Sciences and Nutrition. 5322-5332.
  7. Beiraghi-Toosi, Sh., Mohebbi, M. M. 2017. Effect of feed composition and process variables on physicochemical properties of solid foams composed of corn starch and sesame seeds by extrusion method. Iranian J. of Food Science and Technology Research, 4:5. 865-876
  8. Brennan. M., Narciso, J., Guan, J., Zhang, J., Yuan, L., Serventi, L. and Brennan, C. 2020. Correlations between the phenolic and fibre composition of mushrooms and the glycaemic and textural characteristics of mushroom enriched extruded products. LWT. 118
  9. Camire, M.E., & King, C.C. 1991. Protein and fiber supplementation effects on extruded cornmeal snack quality. J. of Food Science, 56:3. 760-763.
  10. Carvalho, C.W.P., Ascheri, J.L.R., Ascheri, D.P., and Felberg, I. 2005. High-fiber expanded snacks extruded from soybean hull fine maize grits, 2nd mercosur congress on chemical engineering.
  11. Chanlat, N., Songsermpong, S., Charunuch, C., and Naivikul, O. 2011. Twin-Screw Extrusion of Pre-Germinated. Brown Rice: Physicochemical Properties and Aminobutyric Acid Content (GABA) of Extruded Snacks. International J. of Food Engineering. 7: 4.
  12. Charunuch, C., Limsangouan, N., Prasert, W. and Wongkrajang, K.T. 2014. Optimization of extrusion conditions for ready-to-eat breakfast cereal enhanced with defatted rice bran. International Food Research J. 21: 2. 713-722.
  13. Dehghan-Shoar Z., Allan, K., Hardacre, Charles, and Brennan, S. 2010. The physico-chemical characteristics of extruded snacks enriched with tomato lycopene, Food Chemistry 123 1117–1122 (In Persian).
  14. Ding, Q.-B., Ainsworth, P., Tucker, G., and Marson, H. 2005. The effect of extrusion conditions on the physicochemical properties and sensory characteristics of rice-based expanded snacks. J. of Food Engineering, 66:3. 283-289
  15. Fiuzi, B., Varidi, M., Milani, A., and Shahidi, F. 2018. Optimization of formulation variables and process conditions for extrusion of bulk snack products containing coriander meal flour. Research and Innovation in Food Science and Technology. 7:3. 35-17 (In Persian)
  16. Garcia, J.M. Agar, I.T. and Streif, J. 1992. Fat content and fatty acid composition individual seed of pistachio varieties grown in Turkey. Garten bauwissenchaft. 57.130-137
  17. Goga, M., Hansen, C.L. and Hwang, S. 1997. Twin-screw extrusion performance of non-fat dry milk & cream in a corn-flour based system.
  18. Grasso, S. 2020. Extruded snacks from industrial by-products: A review. Trends in Food Science & Technology. 99: 274-294
  19. Guy, R. 2001. Extrusion cooking technologies and application. Florida, Wood head Publication. P. 50-100.
  20. Hagenimana, A., Ding, X., and Fang, T. 2006. Evaluation of rice flour modified by extrusion cooking. J. of Cereal Science, 43:1. 38-46.
  21. Hsieh, F., Grenus, K.M., Hu, L. and Huff, E.T. 1993. Twin-screw extrusion of rice flour with salt & sugar. Cereal Chem. 70: 5. 493-498.
  22. Hutton, C.W. and Campbell, A.M. 1981.Water and fat absorption In Protein Functionality in Foods, 147, Cherry, J.P. (ed.), American Chemical Society, Washington D.C.
  23. Kakaei, K., Noshad, M., Nasehi, B., Hojjati, M., Beiraghi- Toosi, SH. 2018. Effect of storage time on physicochemical properties of extruded snacks containing pomegranate powder. (In Persian). Iranian Food Science and Technology, 15:1. 211-221
  24. Koksel, H., Ryu, G.H., Ozboy‐Ozbas, O., Basman, A., and Ng, P.K.W. 2003. Development of a bulgur‐like product using extrusion cooking. J.of the Science of Food and Agriculture, 83:7. 630-636.
  25. Lazou, A., Krokida, M., and Tzia, C. 2010. Sensory properties and acceptability of corn and lentil extruded puffs. J. of sensory studies.25:6. 838-860.
  26. Lei, H., Ruan, R., Fulcher, R.G. and Lengerich, B.V.T. 2008. Color development in an extrusion-cooked model system. Int. J of Agric & Biol Eng.
  27. Liu, S.L., Lin, X., Shi, D.Y., Cheng, J., Wu, C.Q., and Zhang, Y.D. Reactive oxygen species stimulated human hepatoma cell proliferation via cross-talk between PI3-K/PKB and JNK signaling pathways. Arch Biochem Biophys. Oct; 406:2. 173-82.
  28. Lue, S., Hsieh, F., Peng, I. and Huff, H. 1990. Expansion of corn extrudes containing dietary fiber a microstructure study. Lebensmitte l- Wissenschaft & Technology, 23:2. 165-173.
  29. Mardani Toroghi, P., Basiri, A., Milani, E., and Goli Movahed, Q. 2016. The effect of bran content and extrusion process variables on the functional properties of instant wheat flour powder. New food technologies. 3:3. 23-13 (In Persian)
  30. Maskan, M. and Karatas, S. 1998. Fatty acid oxidation pistachio nuts stored under various atmospheric conditions and different temperatures. J. Sci. Food Agri. 77. 334-340.
  31. Milani, A., Hesarinejad, M., Movahed, Q., Kochaki, A. and Tousi, Sh. 2013. Evaluation of the effect of extrusion process variables on the functional characteristics of bulk snacks based on sprouted khalar flour. 21st National Congress of Food Science and (In Persian)
  32. Mohammadifard, N., Salehi-Abargouei, A; Salas-Salvadó, J., Guasch-Ferré, M., Humphries, K. and Sarrafzadegan, N. 2015. "The effect of tree nut, peanut, and soy nut consumption on blood pressure: a systematic review and meta-analysis of randomized controlled clinical trials". The American Journal of Clinical Nutrition (Systematic Review & Meta-Analysis). 101: 5. 966–82 (In Persian)
  33. Moraru, C.I. and Kokini, J.L. 2003. Nucleation & Expansion During Extrusion & Microwave Heating of Cereal Foods. Comprehensive Reviws In Food SCI. & Food Safety.
  34. Najafzadeh, M., Bolandi, M., and Milani, A. 2015. The effect of formulation variables and extrusion process conditions on the properties of bulky snacks containing fiber supplement (sesame and wheat bran meal), J.of Food Science and Technology,13: 1.127-137.(In Persian)

35.              Nakhon, P. Jangchud, K., Jangchud, A. Charunuch, C. 2018. Optimization of pumpkin and feed moisture content to produce healthy pumpkin-germinated brown rice extruded snacks. 52: 6. 550-556

  1. Onwulata, C., Smith, P., Konstance, R., and Holsinger, V.H. 2001. Coextrusion of dietary fiber and milk proteins in expanded corn products. Lebensmittel-Wissenschaft and Technologie, 34. 424-429
  2. Potter, R., Stojceska, V. and Plunkett, A. 2013. The use of fruit powders in extruded snacks suitable for Children’s diets. Food Science and Technology. 51: 537-544
  3. Saeleaw, M., Dürrschmid, K. and Schleining, G. 2012. The effect of extrusion conditions on mechanical-sound and sensory evaluation of rye expanded snack. J.of Food Engineering 110. 532-540.

39.              Sarawong, C., Schoenlechner, R., Sakiguchi, K., Berghofer, E. and Ng, P. 2014. Effect of extrusion cooking on the physicochemical properties, resistant starch, phenolic content and antioxidant capacities of green banana flour. Food Chemistry. 143. 33-39.

  1. Silva, E., Ascheri, J., Carvalho, C., Takeiti, C. and Berrios, J. 2014. Physical characteristics of extrudates from corn flour and dehulled carioca bean flour blend. LWT - Food Science and Technology, 58: 620-626.
  2. Suknark K, Philips RD, Chinnan MS.1997. hysical properties of directly expanded extrudates formulated from partially defatted peanut flour and different types of starch. Food Research International. 30:8. 575-583.
  3. Yagci, S., & Gogus, F. 2008. Response surface methodology for evaluation of physical and functional properties of extruded snack foods developed from food-by-products. J.of Food Engineering, 86:1. 122-132.